Netgear FVS328 Reference Manual
Managing Your Network
8-1
May 2004, 202-10031-01
Chapter 8
Managing Your Network
This chapter describes how to perform network management tasks with your FVS328 ProSafe
VPN Firewall with Dial Back-up.
VPN Firewall with Dial Back-up.
Network Management
The FVS328 provides remote management access and a variety of status and usage information
which is discussed below.
which is discussed below.
How to Configure Remote Management
Using the Remote Management page, you can allow a user or users on the Internet to configure,
upgrade and check the status of your FVS328 Firewall.
upgrade and check the status of your FVS328 Firewall.
1.
Log in to the firewall at its default LAN address of
http://192.168.0.1
with its default user
name of
admin
, default password of
password
, or using whatever password and LAN address
you have chosen for the firewall.
2.
In the Advanced section on the left navigator, select Remote Management.
3.
Select the Turn Remote Management On check box.
4.
Specify what external addresses will be allowed to access the firewall’s remote management.
Note: For security reasons, restrict access to as few external IP addresses as practical.
a.
To allow access from any IP address on the Internet, select Everyone.
b.
To allow access from a range of IP addresses on the Internet, select IP address range.
Enter a beginning and ending IP address to define the allowed range.
Note:
Be sure to change the router's default password to a very secure password. The
ideal password should contain no dictionary words from any language, and should be a
mixture of letters (both upper and lower case), numbers, and symbols. Your password
can be up to 30 characters.
mixture of letters (both upper and lower case), numbers, and symbols. Your password
can be up to 30 characters.