Netgear FVS328 Reference Manual

Protecting Your Network

6-15

If your region uses Daylight Savings Time, you must manually check Adjust for 

Daylight Savings Time on the first day of Daylight Savings Time, and uncheck it at the end. 
Enabling Daylight Savings Time will cause one hour to be added to the standard time.

4.

Choose your NTP server. The firewall uses Netgear NTP servers by default. If you would 
prefer to use a particular NTP server as the primary server, enter its IP address under Use this 
NTP Server. The fixed NTP query interval is 2 hours.

5.

Click Apply to save your settings.

If you enabled services blocking in the Block Services menu or Port forwarding in the Ports menu, 
you can set up a schedule for when blocking occurs or when access isn't restricted. 

1.

Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User 
Name of 

, default password of 

, or using whatever Password and LAN 

address you have chosen for the firewall.

2.

Click Schedule on the Security menu to display the 

3.

To block Internet services based on a schedule, select Every Day or select one or more days. If 
you want to limit access completely for the selected days, select All Day. Otherwise, to limit 
access during certain times for the selected days, enter Start Blocking and End Blocking times.

Note:  Enter the values as 24-hour time. For example, 10:30 am would be 10 hours and 30 
minutes and 10:30 pm would be 22 hours and 30 minutes. 

4.

Click Apply to save your changes.