Adtran 5305 Quick Setup Guide

Quick Start Guide, 61200831L1-13C, July 2005

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2005 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at 

www.adtran.com

.

1

TX1

Transmit Positive

2

TX2

Transmit Negative

3

RX1

Receive Positive

4, 5

—

Unused

6

RX2

Receive Negative

7, 8

—

Unused

1

DCD

Data Carrier Detect (output)

2

RD

Receive Data (output)

3

TD

Transmit Data (input)

4

DTR

Data Terminal Ready (input)

5

SG

Signal Ground

6

DSR

Data Set Ready (output)

7

RTS

Request to Send (input)

8

CTS

Clear to Send (output)

9

RI

Ring Indicate (output)

1. Remove power from the NetVanta 5305 base unit.

1. Remove the existing system controller module from the controller slot in the base unit.

2. Slide the replacement system controller module into the controller slot until the module 

is firmly seated against the chassis.

3. Secure the screws at both edges of the module. Tighten with a screwdriver.

4. Connect the cables to the associated device(s).

5. Complete the system installation as specified in the NetVanta 5305 Hardware 

Installation Guide provided on your ADTRAN OS System Documentation CD.

Console: EIA-232 (DB-9 female) for access to command line 
interface and monitoring
Ethernet: Two 10/100BaseT interfaces (RJ-48C) for connection 
to the local area network

FCC Part 15 Class A, EN 55022 Class A, EN 55024, 
EN 61000-3-2, EN 61000-3-3
UL/CUL 60950, EN 60950, IEC 60950, AS/NZS 60950

Dimensions: 11.63-inch W x 8.63-inch D
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Relative Humidity: Up to 95 percent, noncondensing