Adtran 600R User Manual
Total Access 600 Series System Manual
Section 4 User Interface Guide
61200624L1-1B
© 2004 ADTRAN, Inc.
45
Additional Terminal Menu Window Features
•
Mode – displays the network interface mode of the unit (for example, T1 IAD, SHDSL IAD, SDSL
IAD, ADSL IAD)
IAD, ADSL IAD)
•
L2 Status – displays the current status of the L2 protocol (ATM sync is either up or down) – ATM Only
•
DS0 Mapping – displays the current mapping of DS0s in the system. DS0s mapped to the router
display r, unmapped DS0s display –, and all other DS0s display *.
•
Tool Tip – provides a brief description of the currently selected mode.
•
Slot Status – displays type of module installed in each slot. No entry will appear for slots not containing
a module.
a module.
•
Telnet Info – displays the user name when connected via Telnet. This information is not displayed when
connecting to the system via the
connecting to the system via the
CRAFT
interface.
•
Ethernet Link Status – displays the current status of the integrated Ethernet interface (located on the rear
of the chassis).
of the chassis).
•
Extended Help – displays information about selected commands <
CTRL+A
>.
•
Navigation Help – lists characters used for navigating the terminal menu and session management
<
<
CTRL+Z
>.
•
Config Status – displays * when current configuration contains changes that have not been saved to
flash memory. Save changes by backing out to the main menu, or press <CTRL + W> to force a manual
save.
flash memory. Save changes by backing out to the main menu, or press <CTRL + W> to force a manual
save.
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system. Press <CTRL+Z > to activate a pop-up screen listing the navigation
keystrokes.
and to configure the system. Press <CTRL+Z > to activate a pop-up screen listing the navigation
keystrokes.
Moving through the Menus
To do this...
Press this key...
Return to the home screen
H
Jump between two menu items
Press <J> while the cursor is located on a menu item, and you jump back to the
main screen.
Go to another menu item, press <J>, and you jump back to the screen that was
displayed the first time you pressed <J>.
Press <J> anytime you want to jump between these items.
main screen.
Go to another menu item, press <J>, and you jump back to the screen that was
displayed the first time you pressed <J>.
Press <J> anytime you want to jump between these items.
J
Select items
Arrows
Edit a selected menu item
Enter
Cancel an edit
Escape
Close pop-up help screen
Escape
Move between the left and right panes
Tab
Arrows
Move to the top of a screen
A