Netopia 430 s Reference Guide
AppleTalk Setup
6-11
■
You can also set the range of EtherTalk Phase II network
numbers. Select Net Low and enter the lower limit of the
network number range. Select Net High and enter the upper
limit of the range.
numbers. Select Net Low and enter the lower limit of the
network number range. Select Net High and enter the upper
limit of the range.
■
Select the Seeding pop-up menu and choose the seeding
method for Netopia to use.
method for Netopia to use.
You have finished configuring EtherTalk Phase II.
LocalTalk
The Netopia ISDN Router can function as a LocalTalk to EtherTalk
router. This means that a LocalTalk network can be connected to the
Netopia’s LocalTalk por t. You can enable this feature by configuring
the Netopia’s LocalTalk por t.
router. This means that a LocalTalk network can be connected to the
Netopia’s LocalTalk por t. You can enable this feature by configuring
the Netopia’s LocalTalk por t.
Select LocalTalk Setup in the AppleTalk Setup screen and press
Return to the LocalTalk Routing Setup screen.
Return to the LocalTalk Routing Setup screen.
Netopia Corporate models
LocalTalk Routing Setup
LocalTalk Enabled:
On
LocalTalk Zone Name:
Unnamed
LocalTalk Net Number:
0
Seeding...:
Soft-Seeding
Use this screen to set up the LocalTalk Port Routing attributes.
■
If you are using LocalTalk with the Netopia ISDN Router, select
LocalTalk Enabled and make sure LocalTalk is set to On, which
is the default.
LocalTalk Enabled and make sure LocalTalk is set to On, which
is the default.