Quantum DAT 160 User Guide
Chapter 3 Installing External Tape Drives
Unpacking Your Drive
Quantum DAT 160 User’s Guide
25
Unpacking Your Drive
Before you unpack the contents of your drive package, inspect the
shipping containers for damage. If you spot damage to the container,
shipping containers for damage. If you spot damage to the container,
notify your carrier immediately.
When you unpack the package, compare the items received with those on
the packing list. If any item is missing or damaged, please contact your
When you unpack the package, compare the items received with those on
the packing list. If any item is missing or damaged, please contact your
place of purchase immediately.
Connecting the Power and USB Cables
A power cable is provided with your Quantum DAT 160 tape drive. The
USB 2.0 cable is already fitted to the tape drive, you cannot remove it.
USB 2.0 cable is already fitted to the tape drive, you cannot remove it.
1
Make sure that the drive is switched OFF (O side down). The power
switch is on the rear panel.
switch is on the rear panel.
2
Plug the power cable securely into the socket on the rear panel of the
drive and plug the other end of the power cable into the power outlet.
drive and plug the other end of the power cable into the power outlet.
Note:
The drive is not powered from the USB bus. It must be
connected to the main power supply.
connected to the main power supply.