Quantum DAT 160 User Guide
Chapter 3 Installing External Tape Drives
Registering Your Tape Drive
Quantum DAT 160 User’s Guide
34
6
Use your backup software application to perform a sample backup-
and-verify operation. The green Ready LED flashes as data is written
to and/or read from the tape.
7
At the end of the operation, press the
Eject
button on the front of the
external tape drive to eject the cartridge from the drive.
If you encountered any problems during this procedure, see
troubleshooting procedures.
Registering Your Tape Drive
After you install the external tape drive, be sure to register it. Registering
your drive ensures that you will receive the latest information about your
drive, as well as other product, service, and support information. For
your convenience, you can register your drive either through our Web
site or by fax.
• If you have an Internet connection, please visit
to register your product.
• If you do not have an Internet connection, complete the Registration
Card included with your package and either mail or fax it to the
address or fax number on the card.