Quantum DAT 160 User Guide

Appendix B  SCSI Configuration Guide

SCSI Termination

Quantum DAT 160 User’s Guide

58

Figure 25  SCSI Termination in 
Internal Drives

As long as this terminator is attached, you do not need to take any further 

action. However, if you have other devices attached to the cable, make 

sure that they have termination removed or disabled.

2

All Quantum DAT external tape drives are supplied with the appropriate 

cable and LVD terminators.
Make sure the terminator is firmly attached to the SCSI-OUT connector 

on the rear of the device when you install it. Always use the supplied 

LVD terminator for proper operation.

If you have an internal and external device attached to the 

same SCSI bus, the HBA will be in the middle of the cable and 

thus its termination must be disabled. See the host bus 

adapter's documentation for details of how to do this.