Quantum fc1202 User Guide
Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Display Trace and Assertion History
Display Trace and Assertion History
82
Quantum FC1202 User’s Guide
Trace Dump Menu
options:
•
Display trace for current boot cycle
displays current boot cycle trace
history information.
•
Display trace from previous boot cycle
displays previous boot cycle
trace history information.
•
Display trace from the last assertion failure
displays trace history
information from the last assertion failure.
•
Clear current trace buffer
clears the current trace buffer.
•
Clear (flash) assert trace buffer
clears the assertion failure trace buffer.
• Return to previous menu
Saving Copies of
the Trace Buffers
using FTP
the Trace Buffers
using FTP
2
Using an FTP session, the trace buffers from the FC1202 can be copied
and saved.
1
Verify the FC1202 is connected to the Ethernet network.
2
Start an FTP session.
3
Enter the FC1202 IP address at the FTP prompt:
ftp <IP address>
ftp <IP address>
4
Specify the directory location on the computer or network where the
FTP program will store the trace file.
5
Enter the user name and password.
The factory default user name is root and the default password is
password
The factory default user name is root and the default password is
password
.
6
Specify Bin mode:
bin
bin
7
Enter the appropriate command to copy the current or previous trace
buffer:
Note:
Initially, the factory default FC1202 IP address is 1.1.1.1. To
view the current IP address, navigate to the Ethernet
Configuration Menu and view the screen display. See the
“Configuration Menu” section for information on viewing and
changing the FC1202 IP address.