Quantum fc1202 User Guide

Chapter 1  FC1202 Description and Web Interface

FC1202 Web Interface

Quantum FC1202 User’s Guide

3

1

The FC1202 contains one Fibre Channel port. The port has two 

corresponding LEDs. The top LED indicates activity on the Fibre Channel 

port and the bottom LED indicates a valid Fibre Channel link on the port.

1

The FC1202 contains one RJ-45 Ethernet port which is used for remote 

configuration and bridge management. The port has two corresponding 

LEDs. The top LED indicates activity on the port and the bottom LED 

indicates a valid Ethernet link.

1

The FC1202 contains one serial port which is used to access the serial 

interface and locally manage or configure the bridge.

1

The FC1202 contains one power LED which indicates two power states on 

the bridge. If the LED is green, the bridge is powered on. If the LED is 

yellow, the bridge is in the process of performing a “Power-On-Self-Test” 

or a the bridge has a processor problem.

1

The FC1202 contains a reset button that is used to force a manual reboot 

of the bridge. A pen or other small object must be used to access the reset 

button. You can also reboot the FC1202 from the web interface.

Resetting the FC1202 during a backup/restore job can 

result in a disruption of that process and loss of data. 

Ensure all data transfer jobs have completed before 

resetting the FC1202.

FC1202 Web Interface

1

The FC1202 utilizes a web-based interface which allows you to configure 

and manage the bridge from a remote workstation on the same network. 

The FC1202 is managed through the following web pages (accessible 

using Internet browser software installed on the host computer):