Quantum fc1202 User Guide

Chapter 1  FC1202 Description and Web Interface

FC1202 Web Interface

Quantum FC1202 User’s Guide

21

1

The 

 pages allow you to configure the individual SCSI ports/

busses on the FC1202.
To access a

 page:

Click on the SCSI port you wish to view or configure from the Ports 

menu.
The SCSI Port page displays (see 

).

View or set the mapping mode for the selected 

port. The port mapping settings are (default: 

indexed):
• Port 0 or Port 1 Device Map
• Indexed (default setting) - the indexed map 

should NOT be edited for security reasons. 

• Auto-assigned - contains all SCSI devices 

that are attached to the FC1202

• SCC 

View or edit the FC1202 performance mode. 

The FC1202 Fibre Channel port speed can be 

set to either 1GB/sec or 2GB/sec. Ensure that 

the FC1202 and the fabric or loop are set for 

the same network speed. You may experience 

framing errors if the network and FC1202 

speeds are set differently.

View or edit the force FCP response code. The 

setting can be toggled between off or on for 

support of HP-specific HBA #223180-B21 and 

#120186-001.

This option is reserved for Quantum 

Customer Support Only.