Quantum fc1202 User Guide
Chapter 2 FC1202 Bridge Serial/Telnet User Interface
Perform Configuration
Perform Configuration
50
Quantum FC1202 User’s Guide
Figure 33 FC1202
Configuration Menu
Configuration Menu
After any configuration changes are made, select A) Save
Configuration to record the changes.
If the configuration has been modified to meet
If the configuration has been modified to meet
company-specific needs, back up the company-specific
configuration to an external file. If necessary, these settings can
later be restored to the FC1202.
Configuration Menu
options:
•
Baud Rate Configuration
changes the baud rate on the serial port.
•
Ethernet Configuration
enters Ethernet network settings.
•
Fibre Channel Configuration
configures the settings for the Fibre
Channel port.
•
Parallel SCSI Configuration
configures the settings for the SCSI buses.
•
Device Mapping
modifies map and host settings.
•
Trace and Event Settings Configuration
modifies trace and event filter
settings.
•
Real-Time Clock Configuration
sets the system clock.
•
Active Fabric Configuration
changes the number of controller LUNs.
Note:
The FC1202 is shipped with a configuration of default settings
that is acceptable for most system environments. Few changes
to the configuration should be necessary.