Quantum atl m1500 User Guide

Chapter 7  Running the Demonstration Programs
Running the Demo 2 Program

96

ATL M-Series User’s Guide

Running the Demo 2 Program

7

The 

 program causes the robot to pick a cartridge from the first 

occupied magazine slot and place it in the next vacant magazine slot. The 

robot then moves to the next occupied slot and repeats the process.
To run the 

 program:

Verify that at least one magazine is installed in the library and that at 

least one cartridge is present.

Access the 

 screen (see 

).

Press the 

 or 

 buttons to select 

.

Press 

.

The 

 program starts. This program continues until you press 

the 

 button.

If desired, include the drives or the fixed slot in the test:

If the library is an ATL M1500 in a multiple library stack or an 

ATL M2500, press the 

 button to select the level where the 

desired drive or fixed slot is located.

Press 

 or 

 to include a drive.

Press 

 to include the fixed slot.

To stop the program, press 

.

The GUI displays a status screen listing the demonstration program 

number, the number of cycles completed, and the status of the test: 

pass or fail.

Press 

 to return to the 

 screen.