Quantum atl m1500 Supplementary Manual
Quantum ATL M1500 Unpacking Instructions
Document 6421002-06 A01
July 2003
Removing the Remaining Packing Materials
5
Removing the Remaining Packing Materials
0
Now that you have removed the library from its shipping carton,
remove the remaining packing materials from the library:
1
Remove the antistatic sheet from the library as follows:
a
Cut the tape strips securing the sheet.
b
Fold the sheet down.
c
With the help of a second person, lift the library up off of the
antistatic sheet.
d
Place the library on the table or desk next to the antistatic sheet.
Save the antistatic sheet for possible future use.
Save the antistatic sheet for possible future use.
2
At the back of the library, remove the handle protection pad.
3
If the library will be installed in a rack with a StackLink
mechanism, remove the StackLink cover plate from the back of the
library using a no. 2 POZIDRIV screwdriver (10 in. or 250 mm
long) (see
Figure 2 Removing the
Cover Plate
Cover Plate
4
Put on an antistatic wrist strap and clip it to the antistatic stud on
the back of the library (near the power supply).
Caution:
The library is equipped with a StackLink cover plate.
Do not remove the StackLink cover plate if the
library is a stand-alone unit.