Quantum atl 7100 Installation Instruction
Chapter 2 Unpacking and Moving the Library
Rolling the Library off of the Pallet
Rolling the Library off of the Pallet
16
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
9
Inspect the library for damage that may have occurred during
shipping.
shipping.
Rolling the Library off of the Pallet
2
To remove the library from the pallet, use the procedure below and
refer to
refer to
.
1
Verify that all leveling feet (located on the underside of the
library at the four corners) are in the up position. If not, rotate
each of the four feet clockwise until they are fully retracted.
library at the four corners) are in the up position. If not, rotate
each of the four feet clockwise until they are fully retracted.
2
With one person guiding the library at the off-load side of the
pallet, gently push the library down the ramp and onto the
floor.
pallet, gently push the library down the ramp and onto the
floor.
3
Carefully fold and save the shipping bag. The bag is required if
you need to package the library for reshipment.
you need to package the library for reshipment.
Warning:
The library weighs approximately 500 lb. It is
recommended that two people perform the following
procedure.
recommended that two people perform the following
procedure.