Quantum atl 7100 Installation Instruction
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
33
Appendix A
A
SCSI Cabling Options
The library is shipped with the internal cabling configured for two
separate host SCSI connections (two-wire) and four drives.
separate host SCSI connections (two-wire) and four drives.
In this configuration, the library robotics controller and the top two
drives (drives 0 and 1) are on one SCSI bus (SCSI PORT 1) and the
other two drives (drives 2 and 3) are on a second bus (SCSI PORT
3).
drives (drives 0 and 1) are on one SCSI bus (SCSI PORT 1) and the
other two drives (drives 2 and 3) are on a second bus (SCSI PORT
3).
The tape drives and the library can be reconfigured according to
your needs by using the cable (part no. 6210567) provided in the
accessories kit shipped with each unit.
your needs by using the cable (part no. 6210567) provided in the
accessories kit shipped with each unit.
Note:
The accessories kit contains two SCSI differential
terminators. Some library configurations may require
additional terminators.
terminators. Some library configurations may require
additional terminators.