Quantum dlt 2000 Supplementary Manual
Quantum Corporation
DLTtape
Application Note
_____________________________________________________________________________________________
Copyright 1999-2001 Quantum Corporation or its subsidiaries or affiliates. All rights reserved
DLT™ OEM/OML/OMX FIRMWARE PERSONALITIES
This application note is to be used only as a guideline for the titled subject. The user assumes all
responsibility for understanding the interrelationships of this information with other affected software or
system products. Quantum Corporation provides this information as a service only, and assumes no
responsibility for any damages, which could result from the use of this information.
responsibility for understanding the interrelationships of this information with other affected software or
system products. Quantum Corporation provides this information as a service only, and assumes no
responsibility for any damages, which could result from the use of this information.
The information in this application note is subject to change without notice and is not to be construed as a
commitment by Quantum Corporation. Quantum Corporation assumes no responsibility for any errors that
may appear in this document.
commitment by Quantum Corporation. Quantum Corporation assumes no responsibility for any errors that
may appear in this document.
NOTE: The information in this document pertains to DLT™ 2000, DLT™ 2000XT, DLT™ 4000 or
DLT™ 7000 tape unit or DLT™ 2500, DLT™ 2500XT, DLT™ 2700, DLT™ 2700XT, DLT™ 4500 or
DLT™ 4700 tape mini-library.
DLT™ 7000 tape unit or DLT™ 2500, DLT™ 2500XT, DLT™ 2700, DLT™ 2700XT, DLT™ 4500 or
DLT™ 4700 tape mini-library.
This application note is a brief description of the various personalities of the DLT OEM/OML firmware and
their intended applications. The firmware personality and the sub-personality are returned in vendor
unique inquiry bytes 41 and 42 on SCSI inquiry commands. The OEM firmware personality is represented
by a value of 04h. The OML firmware personality is represented by a value of 0Fh and the OMX firmware
personality is represented by a value of 12h.
their intended applications. The firmware personality and the sub-personality are returned in vendor
unique inquiry bytes 41 and 42 on SCSI inquiry commands. The OEM firmware personality is represented
by a value of 04h. The OML firmware personality is represented by a value of 0Fh and the OMX firmware
personality is represented by a value of 12h.
In general for OEM choices, OEM-1 is the recommended personality for DLT tape drives. Refer to the
description below for more information.
description below for more information.
Personality
Type
Type
Sub-Personality Description
OEM
1
This personality is an OEM-based ANSI SCSI-2 variation. It is the standard
personality shipped with the drive. This code is used for DLT tape unit
installations on most platforms.
personality shipped with the drive. This code is used for DLT tape unit
installations on most platforms.
OEM
2
This personality is an OEM-based ANSI SCSI-1 variation and is used only for
those applications that require SCSI-1 features. Only available for DLT2000,
DLT2000XT, and DLT4000.
those applications that require SCSI-1 features. Only available for DLT2000,
DLT2000XT, and DLT4000.
OEM
3
This personality is an emulation of the IBM 7208, Model 2 and is used only for
DLT tape unit installation on an AS/400. This personality is not available for
DLT7000. Only available for DLT2000, DLT2000XT, and DLT4000.
DLT tape unit installation on an AS/400. This personality is not available for
DLT7000. Only available for DLT2000, DLT2000XT, and DLT4000.
OEM
8
This personality is the standard SCSI-2 implementation with one-way
communication protocol over RS422 port. Only by the library OEM customers use
this code. The SCSI implementation is identical to OEM-1.
communication protocol over RS422 port. Only by the library OEM customers use
this code. The SCSI implementation is identical to OEM-1.
OEM
9
This personality allows DLT emulation of SCSI-2, 8mm tape drive (EXB-8505)
when attached to HP9000/800 systems. HP's fbackup and frecover are not
supported with this code. Although provided for backward compatibility, OEM-1 is
recommended over this code. Only available for DLT2000, DLT2000XT, and
DLT4000.
when attached to HP9000/800 systems. HP's fbackup and frecover are not
supported with this code. Although provided for backward compatibility, OEM-1 is
recommended over this code. Only available for DLT2000, DLT2000XT, and
DLT4000.
OEM
10
This personality allows DLT emulation of HP 7980S when attached to
HP9000/800 systems. Earlier code revisions emulate HP35450A. Although
provided for backward compatibility, OEM-1 is recommended over this code. Only
available for DLT2000, DLT2000XT, and DLT4000.
HP9000/800 systems. Earlier code revisions emulate HP35450A. Although
provided for backward compatibility, OEM-1 is recommended over this code. Only
available for DLT2000, DLT2000XT, and DLT4000.