Quantum DLT-V4 Quick Setup Guide

DLT-V4 Tape Drive

Quick Start Guide

English- - - - - - - - - - - 1

German  - - - - - - - - - - 5

Spanish  - - - - - - - - - - 9

French - - - - - - - - - - 13

Japanese - - - - - - - - 17

Korean - - - - - - - - - - 21

Simplified Chinese - 25

 

Introduction

0

This guide provides instructions on how to configure and install the DLT-V4 tape 
drive in the following configurations: 

•

 — SCSI, SATA, and USB versions 

•

 — SCSI and USB/eSATA versions 

Internal Tape Drive

0

1 Inspect the shipping box and contents of the box for damage. If you find any 

damage, report it to the shipping company.

2 Select a server or workstation to host the tape drive. 

3 Download the device driver from the following Web site:  

4 Shut down and power off the host and all peripheral devices attached to the 

selected host.

5 SCSI Tape Drives Only — If necessary, change the SCSI ID using the SCSI 

jumpers (see 

). (For complete instructions, see the DLT-V4 Product 

Manual.) 

N

OTE

: See the last page of this document for additional resources. 

N

OTE

: Save the packing materials in case you need to move or ship the 

tape drive. You must ship the tape drive in the original or equivalent 
packing materials to preserve your warranty.

N

OTE

: The factory default SCSI ID is 5.