Mitsubishi WS-55517 User Manual

Use A/V Memory Reset to select the device that you 
want to return to the original factory Audio and Video 
settings.  After selecting the device, press ENTER 
and the device’s A/V memory will be reset.

Every device has its own A/V memory that can be 
individually adjusted, through the menu or with the 
remote.  To adjust the settings through the menu, 
select the device in A/V Memory Reset, then select 

Audio or Video.  Press ENTER, to remove the menu 

and display the individual settings.  Press ADJUST  

 

or 

 to select the setting.  Press ADJUST   or   to 

make the adjustment.  To adjust the settings with the 
remote, select Audio or Video on the remote and you 

can adjust the settings for the device currently being 
viewed. 

For descriptions of the individual A/V settings see 

A/V Setting Descriptions, pages 69 and 70.

Select On to display a blue background when no 
signal is being received.  This feature is applicable to 
all inputs, except Ant-1 and Ant-2.

Select On to enhance the contrast in dark scenes 
for better picture quality.  Brighter scenes will not be 
affected.

 TV Speakers
Select On to use the TV’s internal speakers.  Select 
Off when sending the sound through a separate 
stereo system or surround sound A/V receiver.  When 
NetCommand

®

 is enabled, selecting the A/V Receiver 

icon from the Device Selection menu automatically 
turns Off the TV speakers.  See the NetCommand 
menus for further instructions.

Note:  To prevent damage from a sudden 

increase in volume, make sure the TV volume 
is set to low before setting speakers to On.