Mitsubishi ew270u User Guide

EN-11

Your room layout or personal preference will dictate which installation location you select. Take into consideration 

the size and position of your screen, the location of a suitable power outlet, as well as the location and distance 

between the projector and the rest of your equipment.

Your projector is designed to be installed in one of the possible installation locations: 

For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation.For 

details, consult your dealer.

•

The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount 
kit or installation of the ceiling mount kit in an improper location.

•

When the projector is mounted on the ceiling, images may appear darker than those projected in the case of 
tabletop mounting. This isn’t a product malfunction.

The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in 

the projected image size.

16:10 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, 

the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a 

proportionally smaller height equivalent to 90% of the projector's native aspect height.

Select this location with the projector placed near the 

floor in front of the screen. This is the most common way 

to position the projector for quick setup and portability.

Select this location with the projector placed near the 

floor behind the screen.

Note that a special rear projection screen is required.

Set Rear Table in the SYSTEM SETUP: Basic > 

Projector Position menu after you turn the projector on.

Select this location with the projector suspended upside-

down from the ceiling behind the screen.

Note that a special rear projection screen and qualified 

projector ceiling mount kit are required for this 

installation location.

Set Rear Ceiling in the SYSTEM SETUP: Basic > 

Projector Position menu after you turn the projector on.

Select this location with the projector suspended upside-

down from the ceiling in front of the screen.

Purchase a qualified projector ceiling mount kit from 

your dealer to mount your projector on the ceiling.

Set Front Ceiling in the SYSTEM SETUP: Basic > 

Projector Position menu after you turn the projector on.

4:3 aspect image in a 16:10 aspect display area

16:9 aspect image scaled to a 16:10 aspect display area