Quantum powerstor l200 User Guide
Chapter 3 Operator Control Panel
Mode
Mode
32
Quantum|ATL PowerStor L200 Series Library User’s Guide
Sequential
Load cartridges
sequentially from
the lowest
magazine address
and the lowest
loaded slot
position in that
magazine.
sequentially from
the lowest
magazine address
and the lowest
loaded slot
position in that
magazine.
•
Selected
•
NOT Selected
The loading and unloading
of cartridges sequentially
progresses to the last
cartridge, then the library
stops. To reinitiate this
process, load a cartridge into
the drive via the OCP or via
a SCSI Command.
of cartridges sequentially
progresses to the last
cartridge, then the library
stops. To reinitiate this
process, load a cartridge into
the drive via the OCP or via
a SCSI Command.
Works in conjunction with
AutoloadCart
command.
If the library freezes when
this option is selected, power
down the library, wait at
least 10 seconds, then turn
on the power.
this option is selected, power
down the library, wait at
least 10 seconds, then turn
on the power.
Sequential Circular
Primarily
designed for
testing purposes
designed for
testing purposes
•
Selected
•
NOT Selected
Autoload Cart
Loads cartridges
following an
open/close door
operation
following an
open/close door
operation
•
Y
•
N
Functions only with
Sequential
or
Sequential Circ
modes.
Enable Bar Code (optional)
Bar code reader
scans the
cartridge bar code
labels on power-
up and when the
doors are closed
scans the
cartridge bar code
labels on power-
up and when the
doors are closed
•
Y
•
N
The bar code labels are read
via the OCP
via the OCP
Status
display
or a SCSI
Read Element
status command.
Description
Messages
Notes