Quantum scalar 100 User Guide
page 51
Tree View
When a host is selected, information about its WWN, Network Name, Operating System
and HBA attachment is all included in the lower portion of the Data Panel. See Figure 3-9.
and HBA attachment is all included in the lower portion of the Data Panel. See Figure 3-9.
Figure 3-9: Information About a Selected Host
No matter what component in Tree View is selected--host, channel, device, or the SNC
itself--the top "paragraph" of the Data Panel states the IP address, Name, WWN, and
Firmware revision level of the current SNC.
itself--the top "paragraph" of the Data Panel states the IP address, Name, WWN, and
Firmware revision level of the current SNC.
Some information that is presented in the Tree View panel is also presented in the Data
Panel. For example, both Tree View and the Data Panel display the Channel Number,
Target ID, Device LUN and Assigned LUN of a device. A LUN (Logical Unit Number)
is a 3-bit identifier used on a SCSI bus to distinguish between up to eight devices with the
same SCSI ID. Tree View graphically specifies the device type. The Data Panel displays
textual information about the Vendor ID, Product ID, Serial Number, as well as other
information about the size and capacity of the device.
Panel. For example, both Tree View and the Data Panel display the Channel Number,
Target ID, Device LUN and Assigned LUN of a device. A LUN (Logical Unit Number)
is a 3-bit identifier used on a SCSI bus to distinguish between up to eight devices with the
same SCSI ID. Tree View graphically specifies the device type. The Data Panel displays
textual information about the Vendor ID, Product ID, Serial Number, as well as other
information about the size and capacity of the device.
At the top of the Data Panel there is a graphic showing the front of the SNC. In Figure 3-8
on page 50 for example, the slot where the selected device attaches is shown in green. The
slot is connected by a black line to an icon appropriate to the device being represented. For
FC-connected hosts, the slot is connected by an orange line to an icon representing the
Host. See Figure 3-9 on page 51. Note that when the Channel itself is selected neither the
Host nor the device icon appears in the SNC front view graphic.
on page 50 for example, the slot where the selected device attaches is shown in green. The
slot is connected by a black line to an icon appropriate to the device being represented. For
FC-connected hosts, the slot is connected by an orange line to an icon representing the
Host. See Figure 3-9 on page 51. Note that when the Channel itself is selected neither the
Host nor the device icon appears in the SNC front view graphic.