Quantum vls 4mm User Guide
Getting Started
7
Preparing the Host Computer System
Power Off the Computer
❐ Turn off the power switch.
❐ Unplug the cord from the AC outlet.
Confirm and/or Install the SCSI Host Interface
The VLS must be connected to either an integrated SCSI host or a SCSI interface
(host adapter) card installed in the computer – either directly to the I/O connector on
the card or as part of an existing SCSI chain. The SCSI interface must be installed
before you connect the VLS. Refer to the instructions supplied with your selected
SCSI interface.
(host adapter) card installed in the computer – either directly to the I/O connector on
the card or as part of an existing SCSI chain. The SCSI interface must be installed
before you connect the VLS. Refer to the instructions supplied with your selected
SCSI interface.
Now you are ready to connect the VLS to your host computer. Follow the instructions
provided in the next chapter.
provided in the next chapter.
Note
DXU X_cd S_]`edUb cicdU] ^_b]Q\\i Yc dXU cUbfUb