TI ba-35 solar Quick Reference Card
3
BA35ENG.DOC BA-35 Solar Quick Reference Guide
Pat Hatcher Revised: 05/08/00 1:13 PM Printed:
05/08/00 1:13 PM Page 3 of 38
Pat Hatcher Revised: 05/08/00 1:13 PM Printed:
05/08/00 1:13 PM Page 3 of 38
Second Functions
0
(Second Function)—Enables you to
perform the “second” functions that are marked
over some of the keys. To perform a second
function, press
over some of the keys. To perform a second
function, press
0
and then the appropriate
function key.
When you press
0
, 2nd appears in the
display until you press another key.
If you press
0
and then a key that does not
have a second function, the key performs its
normal function. If you accidentally press
normal function. If you accidentally press
0
,
press it again to cancel its effect.
Clearing the Calculator
u
(All Clear/On)—Clears the calculator
completely, including the display, all pending
operations, and the memory and mode
registers. Pressing
operations, and the memory and mode
registers. Pressing
u
also sets the
calculator to floating-decimal format and
financial mode
financial mode
.
-
(Clear Entry/Clear)—Clears incorrect
entries, error conditions, the display, or pending
operations. It does not affect the memory, the
mode registers, or the display format.
operations. It does not affect the memory, the
mode registers, or the display format.
0
b
(Clear Mode Registers)—Clears any
values that have been stored in the mode
registers.
registers.
Note: Changing to a new mode also clears the
contents of the mode registers.
contents of the mode registers.