Qstarz bt-q800 Installation Instruction

Page of 2
BT-Q800 Pro Bluetooth GPS Receiver 
BT-Q800 Pro Quick Installation Guide 
Thank you for purchasing Qstarz BT-Q800 Pro 16-Channel Bluetooth GPS Receiver. It is the world’s 
longest 30 hours of navigation and supports Smart Power control for power saving. 
Main features: 
Acquires 16 satellites all in view in parallel and ultra low power consumption 
Personal/Portable Navigation (PDA, Smartphone, Laptop, etc.) 
Smart power control – Auto detecting On-Off function for power saving
Fast Acquisition Rate within 5 seconds for hot start and 46 seconds for cold start.
Superior sensitivity -155dBm for urban canyon and foliage environment
Navigation time up to 30 hours in continuous mode
Bluetooth V1.2 SPP profile with operation range 10 Meters
A. Standard Package 
GPS Unit BT-Q800 Pro (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick 
Installation Guide. (* Travel Charger plug type might be adjusted according to corresponding countries.) 
1.                                                    2.                                          3.                                                  4.                                       
B. Appearance 
1.    Power jack (mini USB type)   
2.  Power switch  
3.    Battery status LED (Red/Green)   
4.    Bluetooth status LED (Blue)   
5.    GPS status LED (Orange)   
6.  Internal antenna  
7.  External antenna port (MMCX)  
C. Battery installation
C-1 Put Battery in place:  Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the 
unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4). 
                          1.                                                        2.                                                            3.                                                            4. 
C-2 Take Battery out:
  Press the PUSH button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the 
battery from the unit (3).   
                    1.                                                              2.                                                            3.                                                                       
D. Charging your battery 
For the first time using the BT-Q800, please charge battery until it is fully 
charged. Take the power cable and connect it to the power jack (mini USB 
type) and recharge through travel charger or car cigarette adaptor. This will 
begin to charge the battery. Charging time is 3 hours typically. 
- When the Power LED is Red, battery power is low status. Please recharge. 
- When the Power LED is Green, the battery is under charging mode. 
- When the Power LED is Off, the battery is fully charged.