Qstarz bt-q815 Installation Instruction
BT-Q815 Bluetooth GPS Receiver
1
BT-Q815 Quick Installation Guide
Thank you for purchasing Qstarz BT-Q815 Mini Solar MTK Bluetooth GPS Receiver. Next Generation
GPS with same sensitivity as SiRF III but even powerful by SOLAR add-on.
Main features:
z
Adopt MTK chipset with high sensitivity to -158dBm
z
Up to 30hrs operating time for GPS navigation
z
51-Channel performance for fast acquisition and reacquisition
z
Fast Position Fix ,Cold start<36s, Warm start<33s, and Hot start<1s
z
Vehicle tracking & Location base services
z
Compatible with all navigation software
z
Dual Power Supply - Built in rechargeable Lithium ion battery & Solar power
z
Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly
A. Standard Package
GPS Unit BT-Q815 (1) + Lithium-Ion Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick
Installation Guide. (* Travel Charger plug type might be adjusted according to corresponding countries.)
1. 2. 3. 4.
B. Appearance
C. Charging your battery
For the first time using the BT-Q815, please charge battery until it is fully charged. Take the power
cable and connect it to the power jack and recharge through travel charger or car cigarette
adaptor. This will begin to charge the battery. Charging time is 4 hours typically.
cable and connect it to the power jack and recharge through travel charger or car cigarette
adaptor. This will begin to charge the battery. Charging time is 4 hours typically.
- When the Power LED is blanking with Green, battery power is low status / under charging mode.
- When the Power LED is On with Green, the battery is fully charged.