Sony alt-a33pc Manual
Quick Setup Guide
ALT-A33PC
©2009 Sony Corporation Printed in China
Check the package contents
1
Hook up the Wireless Audio
Receiver
1. Insert the wireless transceiver into the
back of Wireless Audio Receiver.
Insert the wireless transceiver
by pushing firmly until you
cannot see it from the side.
mark facing up
Insert securely until you hear a click.
2. Set the S-AIR ID on the back of Wireless
Audio Receiver to “A.”
The S-AIR ID is set to “A” at the factory.
3. Connect the audio cable to the external
music system.
White
Red
To music system
(not supplied)
4. Connect and plug in the AC power
adaptor (), and turn the Wireless
Audio Receiver on by pressing / ().
To DC IN
6V jack
To a wall socket
AC power
adaptor
Wireless Audio
Transmitter for PC
(AIR-PC10T) (1)
Wireless Audio Receiver
(AIR-A10R) (1)
Cradle (1)
Wireless transceiver (1)
Remote (1)
R03 (size AAA) batteries (2)
AC power adaptor (1)
Audio cable (1)
Other contents
Application software S-AIR Cast™ (CD-ROM) (1)
Operating Instructions (3)
Warranty (1)
2
Connect the Wireless Audio
Transmitter
1. Turn on your computer.
2. Quit all applications, then connect the
Wireless Audio Transmitter to your
computer.
If the message to restart the computer appears,
restart the computer.
Once the S-AIR connection is established, the
Once the S-AIR connection is established, the
S-AIR indicator on the Wireless Audio Transmitter
and the Wireless Audio Receiver light up in green.
3
Start playback
Open your media player, press the play
button to start music playback and enjoy.
Now, you are ready to enjoy your computer’s
music library wirelessly throughout your home.
If there is no sound from the connected external
music system, check the following:
Adjust the volume of your computer.
Make sure to set the sound playback device
property on your computer to [AIR-PC10T] as
shown below.
1 Quit all applications (iTunes, etc.).
2 Click in the following sequence:
2 Click in the following sequence:
Windows Vista (in Classic View): [Start] –
[Control Panel] – [Sound] – [Playback]
Windows XP (in Classic View): [Start] –
[Control Panel] – [Sound and Audio Devices] –
[Audio]
Enjoy your music with S-AIR
Cast™
With the supplied S-AIR Cast™ application software, you
can control the media player on your computer using the
buttons on the S-AIR Wireless Audio Receiver.
S-AIR Cast™ enables you to enjoy more advanced usage
such as Remote Mode or Advanced Remote Mode.
Remote Mode enables the S-AIR Wireless Audio Receiver
to remotely control the supported media player, and
Advanced Remote Mode enables the S-AIR Wireless
Audio Receiver to play music tracks without launching a
media player. This allows you to enjoy music without
interference from the Windows system or other
application sound alerts.
For more details, refer to the Operating Instructions of
AIR-PC10T.
Microsoft, Windows and Windows Vista are trademarks or registered
trademarks of Microsoft Corporation in the United States and/or other
countries.
iTunes is a registered trademark of Apple Inc.
All other trademarks and registered trademarks are of their respective
holders. In this manual, TM and
marks are not specified.
4-147-130-11(1)