Sony STR-DA3100ES Operating Guide
Gettin
g
Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision
Data\J9050000_2514877131STRDA3100ESU\2514877131\GB03CON_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-13(1)]
21
US
x SURROUND SP
(Surround speakers)
The surround back speakers are set to the same
setting.
• LARGE
setting.
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other “LARGE” speakers.
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other “LARGE” speakers.
• NO
If you did not connect surround speakers,
select “NO”.
select “NO”.
x SURR BACK SP
(Surround back speakers)
When the surround speakers size parameter is
set to “NO”, the surround back speakers
selection parameter is also automatically set to
“NO” and the setting cannot be changed.
• DUAL
set to “NO”, the surround back speakers
selection parameter is also automatically set to
“NO” and the setting cannot be changed.
• DUAL
If you connect two surround back speakers,
select “DUAL”. The sound will be output to a
maximum of 7.1 channels.
select “DUAL”. The sound will be output to a
maximum of 7.1 channels.
• SINGLE
If you connect only one surround back
speaker, select “SINGLE”. The sound will be
output to a maximum of 6.1 channels.
speaker, select “SINGLE”. The sound will be
output to a maximum of 6.1 channels.
• NO
If you did not connect surround back
speakers, select “NO”.
speakers, select “NO”.
• ZONE-3
If you use the surround back speaker in the
3rd zone, select “ZONE-3”.
3rd zone, select “ZONE-3”.
Tip
The “LARGE” and “SMALL” settings for each
speaker determine whether or not the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
speaker determine whether or not the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, it best not to cut them, if possible. Therefore,
even when using small speakers, you can set them to
“LARGE” if you want to output the bass frequencies
from that speaker. On the other hand, if you are using
a large speaker, but prefer not to have bass frequencies
output from that speaker, set it to “SMALL”.
even when using small speakers, you can set them to
“LARGE” if you want to output the bass frequencies
from that speaker. On the other hand, if you are using
a large speaker, but prefer not to have bass frequencies
output from that speaker, set it to “SMALL”.
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”. If there is not enough bass,
you can use the equalizer to boost the bass levels. To
adjust the equalizer, see page 40.
all speakers to “LARGE”. If there is not enough bass,
you can use the equalizer to boost the bass levels. To
adjust the equalizer, see page 40.
x
FRONT XX feet
(Front speaker distance)
Initial setting: 10 feet
Lets you set the distance from your listening
position to the front speakers (A). You can
adjust from 3 to 23 feet in 1 foot steps.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
Lets you set the distance from your listening
position to the front speakers (A). You can
adjust from 3 to 23 feet in 1 foot steps.
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
When placing only one surround back speaker
30˚
30˚
100˚-120˚
100˚-120˚
A
A
continued
GB01COV_STR-DA3100ES-U.book Page 21 Wednesday, July 13, 2005 2:23 PM