Sony STR-DA3100ES Operating Guide

masterpage:Right

lename[E:\SEM_Janet\Revision 

Data\J9050000_2514877131STRDA3100ESU\2514877131\GB03CON_STR-DA3100ES-U.fm]

 model name1[STR-DA3100ES]

[2-514-877-13(1)]

Connect the supplied AC power cord to the AC 
IN terminal on the receiver, then connect the AC 
power cord to a wall outlet.

• The AC OUTLETs on the rear of the receiver is a 

switched outlet, which supplies power to the 
connected component only while the receiver is 
turned on.

• Make sure that the total power consumption of the 

components connected to the receiver’s AC 
OUTLETs does not exceed the wattage stated on the 
rear panel. Do not connect high-wattage electrical 
home appliances such as electric irons, fans, or TVs 
to this outlet. This may cause a malfunction.

Before using the receiver for the first time, 
initialize the receiver by performing the 
following procedure.
This procedure can also be used to return 
settings you have made to their factory defaults.

Press ?/1 on the receiver to turn off the 
receiver.

Hold down ?/1 on the receiver for 5 
seconds.

While “ENTER to Clear All” appears in the 
display, press MEMORY/ENTER on the 
receiver.

After “MEMORY CLEARING...” appears in 
the display for a while, “MEMORY 
CLEARED!” appears. 
The following are reset to their factory 
settings.
• MASTER VOLUME.
• All settings in the SPEAKER SET UP, 

LEVEL, SURR SET UP, EQUALIZER, 
CUSTOMIZE, TUNER and CIS menus.

• The sound field memorized for each input 

and preset station.

• All preset stations.
• All index names for inputs and preset 

stations.

AC power cord

CENTER

D

K

)

SWITCHED 120W/1A MAX

AC 120V  60Hz

AC IN terminal

GB01COV_STR-DA3100ES-U.book  Page 19  Wednesday, July 13, 2005  2:23 PM