Sony STR-DA3100ES Operating Guide
Gettin
g
Star
ted
masterpage:Right
lename[E:\SEM_Janet\Revision
Data\J9050000_2514877131STRDA3100ESU\2514877131\GB03CON_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-13(1)]
23
US
Adjust the speaker levels and balance while
listening the test tone from your listening
position. Use the remote for the operation.
listening the test tone from your listening
position. Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
centered at 800 Hz.
1
Press ?/1 on the remote to turn on the
receiver.
receiver.
2
Press TEST TONE on the remote.
“TEST TONE” in the LEVEL menu
appears in the display and the test tone is
output from each speaker in sequence.
appears in the display and the test tone is
output from each speaker in sequence.
3
Adjust the speaker level and balance
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 39.
see page 39.
Tip
To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME on the receiver.
time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME on the receiver.
4
Press TEST TONE again.
The test tone turns off.
To output the test tone only from
a specific speaker
a specific speaker
Set “TEST TONE” in the LEVEL menu to
“FIX” (page 39). The test tone is output only
from the selected speaker.
“FIX” (page 39). The test tone is output only
from the selected speaker.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Set “MENU EXPAND” in the CUSTOMIZE
menu to “ON” (page 41). Then select the two
speakers you want to adjust using “PHASE
NOISE” or “PHASE AUDIO” in the LEVEL
menu (page 46).
from two adjacent speakers to adjust their
balance and level.
Set “MENU EXPAND” in the CUSTOMIZE
menu to “ON” (page 41). Then select the two
speakers you want to adjust using “PHASE
NOISE” or “PHASE AUDIO” in the LEVEL
menu (page 46).
6: Adjusting the speaker
levels and balance
levels and balance
— TEST TONE
GB01COV_STR-DA3100ES-U.book Page 23 Wednesday, July 13, 2005 2:23 PM