Sony STR-DA3400ES User Guide

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\090OTH.fm

STR-DA3400ES
3-289-137-12(1)

Set “Sur Back Assign” to “BI-AMP” in the 
Speaker settings menu. The same signals 
output from the SPEAKERS FRONT A 
terminals can be output from the SPEAKERS 
SURROUND BACK terminals by setting “Sur 
Back Assign” to “BI-AMP”.

• You cannot use the SPEAKERS FRONT B 

terminals for a bi-amplifier connection.

• Set “Sur Back Assign” to “BI-AMP” before you 

perform Auto Calibration.

• If you set “Sur Back Assign” to “BI-AMP”, the 

speaker level, balance, and equalizer settings of the 
surround back speakers become invalid, and those 
of the front speakers are used.

• Signals output from the PRE OUT jacks are used 

with the same settings as those of the SPEAKERS 
terminals.

• If you set “Speaker Pattern” to a setting with 

surround back speakers,  you cannot set “Sur Back 
Assign” to “BI-AMP”.

You can operate this receiver using the display 
window if you do not use a GUI when a TV is 
not connected.

When “GUI MODE” is displayed in the 
display window, the menu is set to display on 
the TV screen using a GUI.

V/v repeatedly to select