Sony STR-DA3400ES User Guide

US

D:\Cannes\STR-DA3400ES_U_R1\3289137121\3289137121\3289137121\01US-
STRDA3400ESUC\100REM.fm

STR-DA3400ES
3-289-137-12(1)

You can customize the remote to match the 
components connected to your receiver. You 
can even program the remote to control non-
Sony components and also Sony components 
that the remote is normally unable to control.
The procedure below uses an example in 
which a VCR made by a company other than 
Sony is connected to the VIDEO 1 IN jacks on 
the receiver.
Before you begin, note that:
– You cannot change the settings of PHONO.
– The remote can control only components 

that accept infrared wireless control signals.

Be sure to turn on the receiver and point the 
remote towards the receiver when performing 
the following procedure.

While holding down RM SET 
UP, press AV ?/1.

The RM SET UP button flashes.

For example, if you are going to control a 
VCR connected to VIDEO 1 IN jack, 
press VIDEO1.
The RM SET UP and the SHIFT buttons 
light up. The input button you selected 
(VIDEO 1) flashes.
If you press the button for a component of 
which you cannot program the remote, 
such as DMPORT, XM or SIRIUS, etc., 
the RM SET UP button keeps flashing.

The input button you selected in step 2 
(VIDEO 1) lights up. (The RM SET UP 
and SHIFT buttons remains lit.)

For a TV remote code value, only numbers in 
the 500’s are valid.

Once the numeric code has been verified, 
the RM SET UP button flashes twice and 
the remote automatically exits the 
programming mode. The input button 
lights off.

Press RM SET UP during any step.