Sony STR-DA3400ES Quick Setup Guide

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\060SUR_GB.fm

STR-DA3400ES
3-289-137-41(1)

• The sound fields for music and movie do not work 

in the following cases.
– The multi channel input is selected.
– DTS-HD signals with a sampling frequency of 

more than 48 kHz are being received.

– Dolby TrueHD signals with a sampling 

frequency of more than 48 kHz are being 
received.

– PCM signals with a sampling frequency of more 

than 48 kHz are being received.

– DTS 96/24 signals are being received.

• The effects provided by the virtual speakers may 

cause increased noise in the playback signal.

• When listening with sound fields that employ the 

virtual speakers, you will not be able to hear any 
sound coming directly from the surround speakers.

• When one of the sound fields for music is selected, 

no sound is output from the subwoofer if all the 
speakers are set to “LARGE” in the Speaker 
settings menu. However, the sound will be output 
from the subwoofer if the digital input signal 
contains LFE signals, or if the front or surround 
speakers are set to “SMALL”, the sound field for 
movie is selected, or “Portable Audio” is selected.

• Sound fields with DCS marks use DCS 

technology. See “Glossary” (page 112).

• When a sound field with DCS mark is selected, 

the Digital Cinema Sound lamp lights up on the 
display window.

Select “2ch Stereo” or “A.F.D. Auto” in the 
Surround settings menu.

Be sure to use the buttons on the receiver for 
this operation.

“S.F. CLEAR” appears on the display 
window and all sound fields are reset to 
their initial setting.