Sony STR-DA3400ES Quick Setup Guide

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\080TUN_GB.fm

STR-DA3400ES
3-289-137-41(1)

Repeat steps 1 and 2 of “Presetting 
radio stations”.

Press 

V/v to select the preset station 

you want.
You can select a preset station as follows:
• AM band AM 1 to AM 30
• FM band FM 1 to FM 30

Select a preset station you want to 
name.

Press OPTIONS, then select “Name 
Input”.
For details on naming operations, see 
“Naming inputs” (page 84).

When you name an RDS station and tune in that 
station, the Program Service name appears instead 
of the name you entered. (You cannot change the 
Program Service name. The name you entered will 
be overwritten by the Program Service name.) 

This receiver also allows you to use RDS 
(Radio Data System), which enables radio 
stations to send additional information along 
with the regular program signal. You can 
display RDS information.

• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do 

they provide the same type of services. If you are 
not familiar with the RDS services in your area, 
check with your local radio stations for details.

Simply select a station on the FM 
band using Direct Tuning (page 71), 
Automatic Tuning (page 70), or 
Preset Tuning (page 72).

When you tune in a station that provides RDS 
services, “RDS” lights up and the program 
service name appears on the display.

RDS may not work properly if the station you tuned 
to is not transmitting the RDS signal properly or if 
the signal strength is weak.