Sony STR-DA3400ES Quick Setup Guide

D:\NORM'S JOB\SONY HA\STR-DA3400ES\CEL\3289137411\01GB-
STRDA3400ESUC\090OTH_GB.fm

STR-DA3400ES
3-289-137-41(1)

• AUTO

Gives priority to digital audio signals when 
there are both digital and analog 
connections.
If there are more than one digital connection, 
HDMI audio signals have priority over 
COAXIAL and OPTICAL audio signals.
If there are no digital audio signals, analog 
audio signals are selected.

• ANALOG

Specifies the analog audio signals input to 
the AUDIO IN (L/R) jacks.

• Some audio input modes may not be set up 

depending on the input.

• When HDMI input or DMPORT is selected, 

“------” appears on the display window, and you 
cannot select other audio input modes. Select an 
input other than the HDMI input and DMPORT 
input then set the audio input mode.

• When “2ch Analog Direct” is being used, or the 

multi channel input is selected, audio input mode is 
set to “ANALOG”. You cannot select other audio 
input modes.

You can reassign video and/or audio signals to 
another input.
Example: Connect the OPTICAL OUT jack of 
the DVD player to the OPTICAL VIDEO 1 IN 
jack of this receiver when you want to input 
the only digital optical audio signals from the 
DVD player.
Connect the component video jack of the DVD 
player to the COMPONENT VIDEO COMPO 
1 IN jack of this receiver when you want to 
input the video signals from the DVD player. 
Assign video and/or audio signals to the DVD 
input jack using “Input Assign” in the Input 
menu.

“GUI MODE” appears in the display 
window of the receiver and the GUI menu 
appears on the TV screen. Press MENU if 
the GUI menu does not appear on the TV 
screen.

MENU