Sony str-da5200es User Guide
38
GB
To switch the command mode
of the remote
of the remote
1
Press ?/1 while pressing RM
SET UP.
SET UP.
The RM SET UP button flashes.
2
Press 1 or 2 while the RM SET
UP button is flashing.
UP button is flashing.
When you press 1, the command mode is
set to AV SYSTEM 1. When you press 2,
the command mode is set to AV SYSTEM
2.
set to AV SYSTEM 1. When you press 2,
the command mode is set to AV SYSTEM
2.
3
Press ENTER when the RM SET
UP button lights up.
UP button lights up.
The RM SET UP button flashes twice,
then the command mode setting process
is completed.
then the command mode setting process
is completed.
Tip
When you press RM SET UP, use a thin wire, such
as a paper clip.
as a paper clip.
7: Navigating through
menus
menus
Press MENU, then display a menu on the TV
screen connected to this receiver. You can set
up menus easily.
By using the amplifier menus, you can make
various adjustments to customize the receiver.
Refer to “Operating without a GUI (Graphical
User Interface)” (page 109) when you operate
this receiver without displaying the menu on
the TV screen.
screen connected to this receiver. You can set
up menus easily.
By using the amplifier menus, you can make
various adjustments to customize the receiver.
Refer to “Operating without a GUI (Graphical
User Interface)” (page 109) when you operate
this receiver without displaying the menu on
the TV screen.
1
Connect a TV monitor to this
receiver.
receiver.
2
Turn on the receiver and the TV.
3
Press RECEIVER to enable
receiver operation.
receiver operation.
3
2
1
1
2
5-8
3
MENU
RETURN/
EXIT O
EXIT O
4