Sony STR-DA9000ES User Guide
Oth
e
r Operatio
ns
masterpage:Right
filename[\\Nas-data-server\sony current jobs\SONY STR-DA9000ES\DTP\STR-DA9000ES
GB\GB070TH_STR-DA9000ES-U.fm]
GB\GB070TH_STR-DA9000ES-U.fm]
49
GB
model name1[STR-DA9000ES]
[4-249-349-11(1)]
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
at a specified time. Use the remote for the
operation.
Press SLEEP repeatedly while the power is
on.
on.
Each time you press SLEEP, the display changes
cyclically as follows:
2:00:00
cyclically as follows:
2:00:00
t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press SLEEP while the power is on. The remaining
time appears in the display.
off, press SLEEP while the power is on. The remaining
time appears in the display.
Selecting the front speaker
system
system
Set the SPEAKERS FRONT switch according
to the front speakers you want to drive.
to the front speakers you want to drive.
* When the IMPEDANCE SELECTOR is set to “8W”,
connect speakers with a nominal impedance of 16
ohm or higher. When the IMPEDANCE
SELECTOR is set to “4W”, connect the speakers
with a nominal impedance of 8 ohms or higher.
ohm or higher. When the IMPEDANCE
SELECTOR is set to “4W”, connect the speakers
with a nominal impedance of 8 ohms or higher.
**When you want to turn off the sound output from
SPEAKERS jacks while turning on the sound output
from PREOUT jacks, set the SPEAKERS FRONT
switch to “A”, “B” or “A+B”, then set “OUTPUT” in
the SPEAKER SET UP menu to “PREOUT ONLY”
(page 43).
from PREOUT jacks, set the SPEAKERS FRONT
switch to “A”, “B” or “A+B”, then set “OUTPUT” in
the SPEAKER SET UP menu to “PREOUT ONLY”
(page 43).
Selecting the surround
speaker system
speaker system
Set the SPEAKERS SURROUND switch
according to the surround speakers you want to
drive.
according to the surround speakers you want to
drive.
Using the Sleep Timer
Selecting the speaker
system
system
Set to
To select
A
The speakers connected to the
SPEAKERS FRONT A terminals.
SPEAKERS FRONT A terminals.
B
The speakers connected to the
SPEAKERS FRONT B terminals.
SPEAKERS FRONT B terminals.
A+B*
The speakers connected to both the
SPEAKERS FRONT A and SPEAKERS
FRONT B terminals (parallel
connection).
SPEAKERS FRONT A and SPEAKERS
FRONT B terminals (parallel
connection).
OFF**
No speaker output.
(All the sound output from SPEAKERS
and PREOUT jacks are turned off.)
(All the sound output from SPEAKERS
and PREOUT jacks are turned off.)
Set to
To select
A
The speakers connected to the
SPEAKERS SURROUND A terminals
(7.1 channel).
SPEAKERS SURROUND A terminals
(7.1 channel).
B
The speakers connected to the
SPEAKERS SURROUND B terminals
(5.1 channel).
SPEAKERS SURROUND B terminals
(5.1 channel).
No sound is output from the surround
back speakers.
back speakers.
continued