Sony str-da5500es User Guide

“BRAVIA” Sync is compatible with a Sony 
TV, Blu-ray Disc/DVD player, AV amplifier, 
etc., that is equipped with the Control for 
HDMI function.
By connecting Sony components that are 
compatible with the “BRAVIA” Sync with a 
HDMI cable (not supplied), operation is 
simplified as below:
– One-Touch Play (page 114)
– System Audio Control (page 114)
– System Power-Off (page 115)
– Theater Mode Sync (page 115)
– 24p Auto Sound Sync (page 115)

Control for HDMI is a mutual control function 
standard used by HDMI CEC (Consumer 
Electronics Control) for HDMI (High-
Definition Multimedia Interface).

• When you connect the receiver to a 

component which is not correspond with 
Sony Control for HDMI function.

• When you connect the receiver and 

components using other than HDMI 
connection.

• The Control for HDMI function does not 

work on a component connected to the 
HDMI OUT B jack of the receiver.

We recommend that you connect the receiver 
to products featuring “BRAVIA” Sync.

Depending on the connected component, the 
Control for HDMI function may not work. Refer to 
the operating instructions of the component.

To use the “BRAVIA” Sync, turn the Control 
for HDMI function on for both the receiver 
and the connected component. The receiver is 
compatible with the “Control for HDMI-Easy 
Setting” function. 

When you connect a Sony TV with the 
“Control for HDMI-Easy Setting” function, 
the Control for HDMI function of the receiver 
can be turned on simultaneously by turning the 
Control for HDMI function of the TV on.

Make sure that the receiver, TV, and 
playback components are connected 
using an HDMI cable (not supplied). 
(The respective components must be 
compatible with the Control for HDMI 
function.)

Turn on the receiver, TV and playback 
components.

Turn the Control for HDMI function of 
the TV on.
The Control for HDMI function of the 
receiver and all the connected components 
are simultaneously turned on. During 
setup, “SCANNING” appears in the 
display window of the receiver, and once 
setting is completed, “COMPLETE” will 
appear. Wait until the setup is complete.

For details on setup of the TV, refer to the 
operating instructions of your TV.