Sony str-da5500es User Guide
142
GB
HDMI settings
Makes the required settings for components
connected to the HDMI jacks.
connected to the HDMI jacks.
Lets you turn the function which controls
components connected to the HDMI jack
using an HDMI cable on or off.
components connected to the HDMI jack
using an HDMI cable on or off.
x OFF
x ON
Note
When you set “Control for HDMI” to “ON,” “Audio
Out” may be changed automatically.
Out” may be changed automatically.
For European model
When “Control for HDMI” is turned on and
off, the H.A.T.S. (High quality digital Audio
Transmission System) function turns on and
off in conjunction with the “Control for
HDMI” function. When the H.A.T.S. function
is on, the sound quality is enhanced because
there is no jitter (timing gaps when reading
signals) when transmitting digital audio
signals.
off, the H.A.T.S. (High quality digital Audio
Transmission System) function turns on and
off in conjunction with the “Control for
HDMI” function. When the H.A.T.S. function
is on, the sound quality is enhanced because
there is no jitter (timing gaps when reading
signals) when transmitting digital audio
signals.
Notes
• It takes some time to output the sound after a
playback operation is performed on the connected
component (e.g., pressing the PLAY button,
pressing the STOP button, pressing the PAUSE
button) due to limitations of the H.A.T.S. system.
The time lag depends on the sound source. This
feature may be ineffective depending on the
component and the sound source, even if you set it
to ON.
component (e.g., pressing the PLAY button,
pressing the STOP button, pressing the PAUSE
button) due to limitations of the H.A.T.S. system.
The time lag depends on the sound source. This
feature may be ineffective depending on the
component and the sound source, even if you set it
to ON.
• The components connected to the HDMI jack must
support the H.A.T.S. feature.
• When “Audio Out” is set to “TV+AMP,” the
H.A.T.S. function may not work depending on the
component connected or the status of that
component. In this case, select “AMP” for “Audio
Out.”
component connected or the status of that
component. In this case, select “AMP” for “Audio
Out.”
• The H.A.T.S. function of this receiver works when
a Sony SCD-XA5400ES is connected to the
receiver.
receiver.
Stream information about the
H.A.T.S. function available
H.A.T.S. function available
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 116).
even when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 116).
x OFF
x AUTO
x ON
Note
When “Control for HDMI” is set to “OFF,” you
cannot set “Pass Through.”
cannot set “Pass Through.”
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
from the playback component connected to the
receiver via an HDMI connection.
x TV+AMP
The sound is output from the TV speaker and
the speakers connected to the receiver.
the speakers connected to the receiver.
Control for HDMI
Audio signal input Sampling frequency
Linear PCM 2ch
44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
Linear PCM Multi
44.1 kHz, 48 kHz,
88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
88.2 kHz, 96 kHz,
176.4 kHz, 192 kHz
DSD
2.8224 MHz
Pass Through
Audio Out (Setting HDMI audio
input)
input)