Sony STR-DE898 Manual
Ampl
ifier O
p
erati
o
n
masterpage:Right
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB04BSC_STR-
DE898-U.fm]
DE898-U.fm]
25
GB
model name1[STR-DE898]
[2-580-791-11(3)]
Direct tuning
You can enter the frequency of the station you
want directly. Use the remote for the operation.
want directly. Use the remote for the operation.
1
Press TUNER repeatedly to select the
FM or AM band.
FM or AM band.
The last received station is tuned in.
Tip
You can also use INPUT SELECTOR on the
receiver.
receiver.
2
Press D.TUNING.
3
Press the numeric buttons to enter the
frequency.
frequency.
Example 1: FM 102.50 MHz
Press 1
b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Press 1
b 3 b 5 b 0
(You do not have to enter the last “0” when
the tuning scale is set to 10 kHz.)
the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat steps 2 and 3. If the entered
numbers still flash, the frequency is not used in
your area.
If not, repeat steps 2 and 3. If the entered
numbers still flash, the frequency is not used in
your area.
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Turn INPUT SELECTOR to select the
FM or AM band.
FM or AM band.
The last received station is tuned in.
2
Tune in the station that you want to
preset using Automatic Tuning
(page 24) or Direct Tuning (page 25).
preset using Automatic Tuning
(page 24) or Direct Tuning (page 25).
3
Press MEMORY.
4
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select a preset
station number.
TUNING – repeatedly to select a preset
station number.
Each time you press the button, you can
select the preset station number as follows:
select the preset station number as follows:
If the “MEMORY” indication turns off
before you select the preset station number,
start again from step 3.
before you select the preset station number,
start again from step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric button to select a preset number.
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric button to select a preset number.
5
Press MEMORY again.
The station is stored to the selected preset
number.
number.
6
Repeat steps 2 to 5 to preset another
station.
station.
Presetting radio stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
continued
GB01COV_STR-DE898-U.book Page 25 Tuesday, March 15, 2005 12:20 PM