Sony STR-DH720 User Guide

D:\NORM'S JOB\SONY HA\SO0133\STR-DH720_PMRF_02\4262412113_GB\GB05ENJ_STR-
DH720-CEL.fm

STR-DH720

4-262-412-11(3)

• Before you perform the “Control for HDMI-Easy 

Setting” on your TV, be sure to turn on the TV and 
other connected equipment including the receiver 
first. 

• If the playback equipment cannot function after 

you have made the settings for “Control for HDMI- 
Easy Setting”, check the Control for HDMI setting 
on your TV. 

• If the connected equipment does not support the 

“Control for HDMI-Easy Setting”, but still 
supports the Control for HDMI, then you need to 
set the Control for HDMI function for the 
connected equipment before you perform the 
“Control for HDMI-Easy Setting” from the TV.

• If you have assigned the HDMI input to another 

input using “HDMI Assign” in HDMI menu, the 
One-Touch Play function is not available.

 

By a simple operation (one-touch), equipment 
connected to the receiver with Bravia Sync 
function start automatically. You can enjoy the 
sound/image using connected equipment.
When you set “Pass Through” to “AUTO” or 
“ON”, sound and image can be output only 
from the TV while the receiver remains in 
standby mode.

When you start playback a connected 
equipment, the receiver and TV operation are 
simplified as follow:

• Be sure that the System Audio Control function is 

set to on using TV menu.

• Depending on the TV, the start of the content may 

not appear.

• Depending on the settings, the receiver may not 

turns on when “Pass Through” is set to “AUTO” or 
“ON”.

You can also select a connected equipment, such as 
Blu-ray Disc/DVD player from the TV menu. The 
receiver and TV will automatically switch to the 
appropriate HDMI input.

 

You can enjoy the TV sound from the speakers 
connected to the receiver by a simple 
operation. 
You can operate System Audio Control 
function using the TV menu. For details, refer 
to the operating instructions of the TV.

You can also use the System Audio Control 
function as follows.
• If you turn on the receiver while the TV is 

turned on, the System Audio Control 
function will automatically activate to 
output TV sound through the speakers 
connected to the receiver. However, if you 
turn off the receiver, the sound will output 
from the TV speakers. 

Turns on (if in standby mode)

Switches to appropriate HDMI input

Sets System 
Audio Control 
to on

• Turns on (if in 

standby mode)

• Switches to 

appropriate 
HDMI input

Minimizes TV 
volume

Outputs TV 
sound