Sony STR-DH810 User Guide

“BRAVIA” Sync is compatible with Sony TV, 
Blu-ray Disc/DVD player, AV amplifier, etc., 
that is equipped with the Control for HDMI 
function.
By connecting Sony components that are 
compatible with the “BRAVIA” Sync with an 
HDMI cable (not supplied), operation is 
simplified as follows:
• One-Touch Play (page 57)
• System Audio Control (page 58)
• System Power Off (page 59)
• Theatre/Theater Mode Sync (page 59) 
• Audio Return Channel (page 60)

Control for HDMI is a mutual control function 
standard used by HDMI CEC (Consumer 
Electronics Control) for HDMI (High-
Definition Multimedia Interface).

We recommend that you connect the receiver 
to products featuring “BRAVIA” Sync.

Depending on the connected component, the 
Control for HDMI function may not work. Refer to 
the operating instructions of the component.

The receiver is compatible with the “Control 
for HDMI-Easy Setting” function.
• If your TV is compatible with the “Control 

for HDMI-Easy Setting” function, you can 
set the Control for HDMI function of the 
receiver and playback components 
automatically by setting the TV (page 56).

• If your TV is not compatible with the 

“Control for HDMI-Easy Setting” function, 
set the Control for HDMI function of the 
receiver, playback components and TV 
individually (page 57).

The Control for HDMI function of the receiver 
can be turned on simultaneously by turning on 
the Control for HDMI function of the TV.

Connect the receiver, TV and playback 
components via HDMI connection 
(page 24).

 

(The respective components must be 
compatible with the Control for HDMI 
function.)

Turn on the receiver, TV and playback 
components.

Turn on the Control for HDMI function 
of the TV.
The Control for HDMI function of the 
receiver and all the connected components 
are turned on simultaneously. When the 
setup is completed, “COMPLETE” will 
appear.

For details on setting the TV, refer to the 
operating instructions supplied with the TV.