Sony STR-DH810 User Guide

 

 

 

 

 

 

 

 

You can customize the settings of the receiver.

x DIMMER

Lets you adjust the brightness of the display in 
3 levels.

You can also use DIMMER on the receiver.

x SLEEP

Lets you set the receiver to turn off 
automatically at a specific time. For details, 
see “Using the Sleep Timer” (page 45).
• 2:00:00
• 1:30:00
• 1:00:00
• 0:30:00
• OFF

x AUTO STBY

Lets you set the receiver switch to standby 
mode automatically when you do not operate 
the receiver or    when there is no signals input 
to the receiver.
• STBY ON

Switches to standby mode after 
approximately 30 minutes.

• STBY OFF

Does not switch to standby mode.

• This function does not work in the following cases.

– TUNER input is selected. 
– S-AIR receiver or surround amplifier is used. 

• If you use the Auto Standby mode and the Sleep 

Timer at the same time, the Sleep Timer has 
priority.

x NAME IN 

Lets you set the name of inputs. For details, 
see “Naming inputs” (page 44).

For details on S-AIR, see “S-AIR Operations” 
(page 60).

You can program the remote to control non-
Sony components by changing the code. Once 
the control signals have been memorized, you 
can use those components as part of your 
system.
Furthermore, you can also program the remote 
for Sony components that the remote is unable 
to control. Note that the remote can only 
control components that accept infrared 
wireless control signals.

You cannot change the settings of DMPORT input 
buttons.

Press AV ?/1 while pressing 
RM SET UP.

The RM SET UP indicator slowly flashes.

For example, if you are going to control a 
CD player, press SA-CD/CD.
The RM SET UP and SHIFT indicator 
light up.

Input 
buttons

AV ?/1

ENTER

RM SET 
UP

TV

Numeric 
buttons