Sony str-dh700 User Guide
103
US
Ad
d
d
itiona
l In
fo
rm
atio
atio
n
There is no picture or an unclear
picture appears on the TV screen.
picture appears on the TV screen.
• Select the appropriate input using the input
buttons.
• Set your TV to the appropriate input mode.
• Move your audio components away from
• Move your audio components away from
the TV.
• Depending on the DIGITAL MEDIA
PORT adapter, video output may not be
possible.
possible.
Recording cannot be carried out.
• Check that the components are connected
correctly (page 22).
• Select the source component using the
input buttons (page 36).
The source sound input to the HDMI
jack on the receiver is not output from
the receiver or the TV speaker.
jack on the receiver is not output from
the receiver or the TV speaker.
• Check the HDMI connection.
• You cannot listen to the Super Audio CD
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
The source image input to the HDMI
jack on the receiver is not output from
the TV.
jack on the receiver is not output from
the TV.
• Check the HDMI connection.
• Depending on the playback component,
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Refer to the operating instructions
supplied with each component.
The control for HDMI function does not
work.
work.
• Check the HDMI connection (page 23).
• Make sure “CONTROL FOR HDMI” is
• Make sure “CONTROL FOR HDMI” is
set to “CTRL ON” in HDMI menu.
• Make sure the connected component is
compatible with the Control for HDMI
function.
function.
• Check the Control for HDMI settings on
the connected component. See the
operating instructions of the connected
component.
operating instructions of the connected
component.
• If you change the HDMI connection,
connect/disconnect the AC power cord, or
there is a power failure, repeat the
procedures of “Preparing for the
“BRAVIA” Sync” (page 76).
there is a power failure, repeat the
procedures of “Preparing for the
“BRAVIA” Sync” (page 76).
No sound is output from the receiver
and TV speaker while using the System
Audio Control function.
and TV speaker while using the System
Audio Control function.
• Make sure the TV is compatible with the
System Audio Control function.
• If the TV does not have System Audio
Control function, set the “AUDIO FOR
HDMI” settings in HDMI menu to
– “TV+AMP” if you want to listen to the
HDMI” settings in HDMI menu to
– “TV+AMP” if you want to listen to the
sound from the TV speaker and
receiver.
receiver.
– “AMP” if you want to listen to the
sound from the receiver.
• If you cannot listen to the sound of a
component connected to the receiver
– Select the appropriate input when you
– Select the appropriate input when you
want to watch a program on a
component connected via HDMI
connection to the receiver.
component connected via HDMI
connection to the receiver.
– Change the TV channel when you want
to watch a TV broadcast.
– Select the component or input you want
to watch when you watch a program on
the component connected to the TV.
Refer to the operating instructions of the
TV on this operation.
the component connected to the TV.
Refer to the operating instructions of the
TV on this operation.
Video
HDMI
continued