Sony str-dh700 User Guide
29
US
Ge
tting Star
tting Star
te
d
6: Preparing the receiver
and the remote
and the remote
Connect the AC power cord (mains lead) to a
wall outlet.
wall outlet.
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1
Press ?/1 to turn off the
receiver.
receiver.
2
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
display alternately.
3
Press MEMORY/ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
display for a while, “CLEARED”
appears.
All the settings you have changed or
adjusted are reset to the initial settings.
Connecting the AC power cord
(mains lead)
(mains lead)
FRONT A
AC power cord (mains lead)
To the wall outlet
Performing initial setup
operations
operations
?/1
PHONES
SPEAKERS
INPUT SELECTOR
INPUT MODE
TUNING MODE
MASTER VOLUME
TONE MODE
DISPLAY
DIMMER
MUTING
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE
MUSIC
TUNING
TONE
VIDEO 2 IN
VIDEO
L AUDIO R
AUTO CAL MIC
?/1
MEMORY/ENTER