Sony str-dh800 User Manual

Page of 124
99
US
 
 
 
 
 
 
 
Ot
her
 Oper
at
ions
Using the Sleep Timer
You can set the receiver to turn off 
automatically at a specified time.
Press SLEEP repeatedly while the 
power is on.
“SLEEP” lights up in the display.
Each time you press SLEEP, the display 
changes cyclically as follows:
0-30-00 
t 1-00-00 t 1-30-00 t 
2-00-00
 
t OFF
Tip
To check the remaining time before the receiver 
turns off, press SLEEP. The remaining time appears 
on the display. If you press SLEEP again, the sleep 
timer will be canceled.
Recording using the 
receiver
You can record from a video/audio component 
using the receiver. Refer to the operating 
instructions supplied with your recording 
component.
You can record onto a CD-R using the 
receiver. See the operating instructions 
supplied with your CD recorder.
1
Press one of the input buttons 
to select the playback 
component.
You can also use INPUT SELECTOR on 
the receiver.
2
Prepare the playback 
component for playing.
For example, tune to the radio station you 
want to record (page 67).
3
Prepare the recording 
component.
Insert a blank CD-R into the CD recorder 
and adjust the recording level.
4
Start recording on the 
recording component, then 
start playback on the playback 
component.
Note
Sound adjustments do not affect the signal output 
from the SA-CD/CD/CD-R OUT jacks.
Recording onto a CD-R