Sony DSR-PD100A User Manual
87
Advanced operations
You can record an audio sound to add to the original sound on a tape by connecting audio
equipment or a microphone. If you connect the audio equipment, you can add sound to your
recorded tape by specifying the starting and ending points. The original sound will not be
erased.
You can only operate with the Remote Commander.
equipment or a microphone. If you connect the audio equipment, you can add sound to your
recorded tape by specifying the starting and ending points. The original sound will not be
erased.
You can only operate with the Remote Commander.
Connecting the microphone with the MIC jack
Note
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a
TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or
headphones.
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a
TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or
headphones.
Connecting the microphone with the intelligent accessory shoe
using the XLR adaptor
using the XLR adaptor
Connection is the same as shown in page 63.
Note
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a
TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or
headphones.
You can check the recorded picture and sound by connecting the AUDIO/VIDEO jack to a
TV.
The recorded sound is not output from a speaker. Check the sound by using the TV or
headphones.
Audio dubbing
MIC
(PLUG IN
POWER)
(PLUG IN
POWER)
Ç
: Signal flow
Microphone (not supplied)
Microphone (not supplied)
XLR adaptor