Sony DSR-PD150 User Manual
36
Using the wide mode
You can record a 16:9 wide picture to watch on a 16:9 wide-screen TV (16:9WIDE).
Black bands appear on the LCD screen or in the viewfinder during recording in
16:9WIDE mode [a]. The picture during playback on a normal TV [b] or on a wide-
screen TV [c] is compressed in the widthwise direction. If you set the screen mode of
the wide-screen TV to the full mode, you can watch pictures of normal images [d].
Black bands appear on the LCD screen or in the viewfinder during recording in
16:9WIDE mode [a]. The picture during playback on a normal TV [b] or on a wide-
screen TV [c] is compressed in the widthwise direction. If you set the screen mode of
the wide-screen TV to the full mode, you can watch pictures of normal images [d].
In standby mode, set 16:9WIDE to ON in
in the menu settings (p. 104).
To cancel the wide mode
Set 16:9WIDE to OFF in the menu settings (p. 104).
In wide mode, you cannot select the following modes:
•Old movie
•Progressive mode
•Old movie
•Progressive mode
Connection to a TV
Pictures recorded in 16:9WIDE mode automatically appear on the TV screen at full size
when you connect your camcorder to a TV that is compatible with the video ID (ID-1/
ID-2) system and when you connect to the S video input jack on a TV.
Pictures recorded in 16:9WIDE mode automatically appear on the TV screen at full size
when you connect your camcorder to a TV that is compatible with the video ID (ID-1/
ID-2) system and when you connect to the S video input jack on a TV.
ID-1 system
The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) using video
signals. If you connect a TV compatible with the ID-1 system, the screen size is
automatically selected.
The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) using video
signals. If you connect a TV compatible with the ID-1 system, the screen size is
automatically selected.
ID-2 system
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment using an A/V
connecting cable.
The ID-2 system sends a copyright protection signal with ID-1 signals inserted between
video signals when you connect your camcorder to other equipment using an A/V
connecting cable.
During recording
You cannot operate the wide mode function. When you cancel the wide mode, set your
camcorder to the standby mode and then set 16:9WIDE to OFF in the menu settings.
You cannot operate the wide mode function. When you cancel the wide mode, set your
camcorder to the standby mode and then set 16:9WIDE to OFF in the menu settings.
[a]
[c]
[b]
[d]
16:9WIDE
MENU