Sony DSR-PD150 User Manual

The camcorder uses two types of time values: time code values and user bits.
The time value is displayed on the LCD screen, in the viewfinder, or on the display
window. The time code and user bits can be set only in DVCAM mode.
The user bits are convenient when using multiple cameras at the same event.
When you record the picture, time code data will be recorded automatically.

This section describes the steps for setting time code recording methods for particular
shooting conditions and setting initial values.

(1) Set the POWER switch to VCR or CAMERA.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select TC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select TC MAKE, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select TC PRESET, then press the dial.
(7) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial.
(8) Set up the first two digits. Turn the SEL/PUSH EXEC dial to select the

number, then press the dial. The time code is set between 00:00:00:00 and
23:59:59:29.

(9) Repeat step 8 to set up the other digits.

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME

 [MENU] : END

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME
   RETURN

 [MENU] : END

00:00:00:00 

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME
   RETURN

 [MENU] : END

REGEN
PRESET

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME
   RETURN

 [MENU] : END

00:00:00:00

RESET
PRESET
RETURN  

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME
   RETURN

 [MENU] : END

PRESET

TC / UB  SET

TC  PRESET
UB  PRESET
TC  FORMAT
TC  RUN
TC  MAKE
UB  T I ME
   RETURN

 [MENU] : END

01:00:00:00

SET
CANCEL