Sony DXC-D35 User Manual
Chapter 1 Overview
18
Chapter 1
Overview
7
REMOTE connector 1 (mini-jack)
Connect the RM-LG1 Remote Control Unit to enable
remote operation of the ClipLink function.
remote operation of the ClipLink function.
8
MONITOR OUT connector (BNC)
Outputs both the camera video and the character
information as displayed on the viewfinder screen.
You can connect an optional LCD color monitor to this
connector.
information as displayed on the viewfinder screen.
You can connect an optional LCD color monitor to this
connector.
9
VIDEO OUT connector (BNC)
This outputs the video signal captured by the camera.
0
REMOTE connector 2 (10-pin)
Connect the optional RM-M7G Remote Control Unit
to this connector. Set the CAMERA HEAD SELECT
switch on the bottom of RM-M7G to 1.
to this connector. Set the CAMERA HEAD SELECT
switch on the bottom of RM-M7G to 1.
Note
When using the RM-M7G, note the following points.
• When operating the camera head from the camera
• When operating the camera head from the camera
control unit, connect the RM-M7G to the camera
control unit.
control unit.
• EZ mode cannot be used if the RM-M7G is
connected to the camera head.
Location and Function of Parts
qa
LENS connector (12-pin, for
2
/
3
-inch lens)
Connect the lens connector.
qs
VF (viewfinder) connector (8-pin)
This is the connector for the DXF-41/51 viewfinder.
Note
When using this connector, do not connect a DXF-801/
801CE viewfinder to the VF connector on the front of
the camera head.
801CE viewfinder to the VF connector on the front of
the camera head.
qd
VTR connectors (PRO 76-pin DIGITAL and
PRO 50-pin)
Connect a dockable VTR. A PRO 76-pin DIGITAL
connector is for the DSR-1/1P and a PRO 50-pin
connector is for the PVV-3/3P or a camera adaptor.
Connect a dockable VTR. A PRO 76-pin DIGITAL
connector is for the DSR-1/1P and a PRO 50-pin
connector is for the PVV-3/3P or a camera adaptor.